Arrival Time off by One Hour for Mio C230

One reader has experienced a problem with the arrival time on Mio C230. Even though I do not have this problem on mine, I thought this might benefit other Mio C230 owners.

Question: “I have a C230 that is set to Eastern Std time and the clock is correct but my Arrival Time is behind by 1 hour. For instance: The current time is 11:15. If I set a route that takes 30minutes, the arrival at your destination will say I will get there at 10:45.

Now this would be a great if I could actually get there an hour earlier than I left (Time Warp Continum kinda thing) but it is annoying when I look at the display and it is incorrect.”

Solution: “I got this answer from tech support at MIO. I wrote up the example below for Eastern Std Time zone.

To correct the Estimated Time of Arrival during Daylight Savings Time.

At Daylight Savings Time Begins:

1) Go to Tools/Language/SetDate&Time and set to GMT-5 Indiana (USA)
2) Tap the Satellite button then Time Sync. Uncheck Auto Correct and set the PNA: manually to the correct time.

At Daylight Savings Time Ends:

1) Go to Tools/Language/SetDate&Time and set to GMT-5 Eastern (USA)
2) Tap the Satellite button then Time Sync. Check Auto Correct and press the arrow between GPS and PNA to sync with the GPS.”

Thank you, Strike (Mike)!


This post may contain affiliated links. When you click on the link and purchase a product, we receive a small commision to keep us running. Thanks.


Be the first to comment

Leave a Reply